Gallon Bottling Machine

6 row 18.9L 3 in 1 gallon filling line with stainless steel pipe

Working process:

Gallon filling line can be divided into 3 steps: washing, filling and capping, total 12 working stations，working process as below：

(1)Set empty gallon mouth to gallon seat, empty barrel will be washed during headstand situation，2 working station for barrel inserting.

(2)Washing process will be divided into 3 steps：1, thimerosal washing，4working positions;2,clean water washing，4working positions。Every washing step is set to 8S，after washing，there will be 10S for dripping.

(3)The gallon after washing will move down 45 degree through the passing chain and will passing out chain and turn over 45 degree by barrel lift cylinder to filling position for filling.

(4)Filling value will driven by cylinder to insert into barrel and start to fill, filling time is controlled by PLC, and filling time is adjustable by control panel according to filling liquid surface。After filling, the extra water will back to pure water tank by automatic vent，it can reduce water consumption。(water tank is not included).

(5)After filling process finish，the filled barrel will be pushed to capping position by barrel stop cylinder，the whole process finish till now.