Gallon Filling Line

6KW PLC control barrel filling machine for 5gallon

Working process:

Barrel filling machine can be divided into 3 steps: washing, filling and capping, total 36 working stations，working process as below：

(1) Set empty barrel mouth to barrel seat, empty barrel will be washed during headstand situation，4 working station for barrel inserting。

(2) Washing process will be divided into 4 steps：1, hot alkali water washing 2,thimerosal washing;3,clean water washing，4,pure water washing。Every washing step is set to 8S，after washing，there will be 10S for dripping.

(3) The barrel after washing will move down 45 degree through the passing chain and will passing out chain and turn over 45 degree by barrel lift cylinder to filling position for filling.

(4) Filling value will driven by cylinder to insert into barrel and start to fill, filling time is controlled by PLC, and filling time is adjustable by control panel according to filling liquid surface。After filling, the extra water will back to pure water tank by automatic vent，it can reduce water consumption.(water tank is not included)

(5) After filling process finish，the filled barrel will be pushed to capping position by barrel stop cylinder，the whole process finish till now.

Parameters:

Cylinder: Air tech-Taiwan

Magnetic valve: Air tech-Taiwan

Rising pump-filling pump: Nanfang

Motor: TWT Taiwan

PLC: Mitsubishi Japanse

Power: 6KW

Dimension: 4500*1500*2000mm

Weight: 600kg